Height Safety

14 Products Found
The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations. Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system. It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.
• An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
• Compact design and lightweight materials provide a tried and tested safety solution Rated for up to a 140kg user
• Can withstand fall arrest forces up to 22kN
• It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load
• The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
• Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
• Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
• Provides safe 360° work area For use on metal or tile roofs 280mm size all purpose metal roofs Conforms to ASNZS 1891.4 requirements
LNQ-HSTBS280 WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Anchor Tetha Bar Straight 280mm

Linq

In Stock $64.00

Anchor Tetha Bar Straight 280mm

The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations. Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system. It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.
• An affordable temporary and reusable alternative to installation of a permanent purlin style anchor Compact design and lightweight materials provide a tried and tested safety solution
• Rated for up to a 140kg user, it can withstand fall arrest forces up to 22kN
• It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load
• The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
• Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
• Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
• Provides safe 360° work area
• For use on metal or tile roofs 500mm used for Trimdeck or Custom Orb roofs Conforms to ASNZS 1891.4 requirements
LNQ-HSTBS500 WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Anchor Tetha Bar Straight 500mm

Linq

In Stock $90.00

Anchor Tetha Bar Straight 500mm


• 1.85M Elasticated Lanyard WLE2- Double Leg Elasticated Lanyard + hardware (see list below) An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment. Drop forged lanyard hardware Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength.
• Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyard's webbing strength.
• Australian designed, engineered, and MADE
• Webbing Tenacity= 23kN
• Webbing is UV rated to meet AS/NZS 1891.1 standard THETA stitch pattern (equals 3300kg strength)
• Engineered to match webbing strength to ensure no weak point in the harness assembly BSI Certified and approved to AS/NZS 1891.1 SN - Snap Hook SD - Scaffold Hook Double Action Steel Alloy 68mm
LNQ-WLE2SNSD WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Elite Double Leg Elasticated Lanyard with Hardware SN & SD X2

Linq

In Stock $252.00

Elite Double Leg Elasticated Lanyard with Hardware SN & SD X

- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment - Liqui-Pel Technology for liquid protection, also easier to clean the harness - High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation - Retro-Reflective Thread in webbing for improved visibility in low light - Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices - Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall - Significantly reducing the risk of injury from hardware hitting the back of workers head - Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements - Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker - Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap Comes with Suspension Trauma Strap: - One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall - Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use Padded Legs for force dispersion at moment of fall impact - Confined Space Rescue Loops Quick Release Buckles - Padding under buckles - Service Pouch on back LNQ-H301 WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Elite Riggers Harness - Standard (M - L) cw Harness Bag (NBHAR)

Linq

ONLY IN STORE

Elite Riggers Harness - Standard (M - L) cw Harness Bag (NBH

WLA1- Single Leg Adjustable Lanyard + hardware An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment. - Drop forged lanyard hardware
• Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton(10kg) breaking strength
• Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyard's webbing strength.
• Adjusts - 0.9m to 2m. Ideal for situations that require length adjustment.
• Australian designed, engineered, and made.
• Webbing Tenacity= 33kN Webbing is UV rated to meet AS/NZS 1891.1 standard THETA stitch pattern (equals 3300kg strength).
• Engineered to match webbing strength to ensure no weak point in the harness assembly. BSI Certified and approved to AS/NZS 1891.1 SN - Snap Hook SN - Snap Hook
LNQ-WLA1SNSN WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Elite Single Leg Shock Absorbing 2M Adjustable Lanyard with Hardware SN X2

Linq

In Stock $143.00

Elite Single Leg Shock Absorbing 2M Adjustable Lanyard with

2M Webbing Lanyard WLO1- Single Leg Webbing Lanyard + hardware An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment. Drop forged lanyard hardware Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyard's webbing strength.
• Australian designed, engineered, and made
• Webbing Tenacity = 33kN
• THETA stitch pattern (equals 3300kg strength)
• Engineered to match webbing strength to ensure no weak point in the harness assembly
• SN - Snap Hook BSI Certified and approved to AS/NZS 1891.1 THETA stitch pattern (equals 3300kg strength)
LNQ-WLO1SNSN WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Elite Single Leg Shock Absorbing Webbing Lanyard with Hardware SN X2

Linq

In Stock $119.00

Elite Single Leg Shock Absorbing Webbing Lanyard with Hardwa

LINQ Essential harness H101 RKRG015SHK1 Rope kernmantle with thimble eye & rope grab.
• 15M with permanently attached shock absorbing 450mm assembly and screw gate karabiner HSASE2515 Anchor Strap Endless 25mm - 1.5M x 1 KSGSA18
• Screw Gate Karabiner x 1 450mm Shock Pack Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN
• An exclusive Extended Length Energy Absorber (ELEA) designed to protect a workers, of up to 160kg, tools and equipment - Pebble weave webbing provides maximum grip precluding incidental buckle slippage
• Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact
• Retro-reflectivity built into webbing 160kg wearer capacity (combined weight of wearer, clothing and tools) when used in conjunction with LINQ shock absorbing lanyard
• Articulated chest and shoulder straps adjustment points designed for female wearers Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance Unique to LINQ:
• Green for safely locked
• Red for not locked feature / indicator
• Weight 165gm Rated to 25kN Opening 18mm Made from Steel Alloy Kit Bag (HSKB710) x 1
LNQ-KITRBSC WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Essential Basic Roofers Harness Kit

Linq

In Stock $368.00

Essential Basic Roofers Harness Kit

- Padding under buckles - Service Pouch on back - High Tenacity - UV stabilised webbing, enhances resistance to solvents and UV light degradation - Retro-Reflective Thread in webbing for improved visibility in low light - Large Dorsal D Ring for easier connection - Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall - Significantly reducing the risk of injury from hardware hitting the back of workers head - Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment - Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements - Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker - Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap LNQ-H101 WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Essential Harness - Standard (M - L)

Linq

In Stock $121.00

Essential Harness - Standard (M - L)

LINQ Essential harness H101 WLO1SNSN Shock Absorbing Webbing Lanyard
• Single Leg (with 2 x Snap Hooks) x 1 RKRG015 Rope kernmantle with thimble eye & rope grab
• 15M with permanently attached shock absorbing 450mm assembly and screw gate karabiner
• HSASE2515 Anchor Strap Endless 25mm - 1.5M x 1 KSGSA18 Screw Gate Karabiner x 2 Kernmantle rope exceeds 14.7kN 110gm of polyester as opposed to 65gm
• This results in exceptional strength capabilities Rope grab as per restraint technique, in order to ensure stopping force is less than 6kN, rope grab should always be used in conjunction with a shock absorbing element
• Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN
• An exclusive Extended Length Energy Absorber (ELEA) designed to protect a workers, of up to 160kg, tools and equipment
• Drop forged lanyard hardware for added strength in case of extreme conditions
• Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
• Pebble weave webbing provides maximum grip precluding incidental buckle slippage
• Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact
• Retro-reflectivity built into webbing 160kg wearer capacity (combined weight of wearer, clothing and tools) when used in conjunction with LINQ shock absorbing lanyard
• Articulated chest and shoulder straps adjustment points designed for female wearers
• Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance Unique to LINQ - Green for safely locked - Red for not locked feature / indicator Available with Kit Bag, Round Bucket or Square Bucket
LNQ-KITRSTD WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Essential Standard Roofers Kit

Linq

In Stock $416.00

Essential Standard Roofers Kit

- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment - High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation - Retro-Reflective Thread in webbing for improved visibility in low light - Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices - Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall - Significantly reducing the risk of injury from hardware hitting the back of workers head - Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements - Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker - Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap Comes with Suspension Trauma Strap: - One-piece Webbing with a quick connection buckle for faster deployment and connection in the event of a fall - Confined Space Rescue Loops Tangle free Triangle Back Mesh Padding under buckles Service Pouch on back LNQ-H201 WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Tactician Riggers Harness -Standard (M - L)

Linq

ONLY IN STORE

Tactician Riggers Harness -Standard (M - L)

The LINQ portable anchorage lifeline is engineered for extreme workplace situations. Complies with AS/NZS1891.2 and EN 795:1996 Class B The product has been developed to be durable and efficient in setup and pack down - The webbing temporary static line kit is a lightweight - 20m line, complete with ratchet tensioner for quick and easy installation - Rated for 2 people - Kit has an easy to use ratchet tensioning device to tighten the line - Easy installation and removal - Ideal for usage between 3 to 20 meters - Includes sewn on bag for easy storage and transportation - Equipped with two double action karabiners provided for attachment to anchor points Conforms to AS/NZS1891.2 Conforms to standard EN 795:1996 Passed the corrosion test in accordance with ISO 9227:1990 - 24 hours LNQ-HSTAL02 WORKWEAR, SAFETY & CORPORATE CLOTHING SPECIALISTS - Temporary Anchor Line 2-Man

Linq

ONLY IN STORE

Temporary Anchor Line 2-Man